Barrel Temperature Gauge
Barrel temperature indicator stickers are the easiest way to keep your barrel from overheating. Indicates temperatures from 50-150 degrees Fahrenheit.
Out of stock
The Best Barrel Temperature Gauge for Precision Rifle
Our barrel temperature gauges read from 50 F – 150 F in 10 degree increments. Oriented to be read by the shooter while shooting to help monitor barrel temperatures. These temperature indicators are designed to be used by Precision Rifle field shooters.
Ours come with no Celsius measurements since most of our shooters are USA based, and it makes the gauges much easier to read.
Overheating your barrel can lead to less accuracy and to shorter barrel life. There is very little current science that show how much. I have read old studies like this one that shows temperatures inside the barrel for a 7.62mm rifle can easily reach 1155 F, and the surface of the barrel after 50 shots was calculated to be 181 F. This is great information, but its not very applicable since it doesn’t replicate the way Precision Rifle shooters behave. However we do know that bad things happen when we get our rifles too hot.
The barrel temperature gauge is applied as near as possible to the chamber around the shoulder of the barrel. First wipe down the barrel with the provided alcohol pad to remove any oil or grease, then remove the backing for the adhesive side and apply the sticker once the alcohol has evaporated.
Keep an eye on the temperature from behind your scope by tilting your head to the side and checking the reading.
If a particular value is GREEN, then that is the current barrel exterior temperature. BLUE indicates that the temperature is slightly lower than the blue value, while BROWN indicates that the actual temperature is slightly higher than that value.
Based on my personal experience I try to keep barrel temperatures under 120 F when possible. If they reach 130 or higher I pause my shooting and take a break to let the barrel cool. This can be particularly useful when fire forming brass, doing load development or when your practicing.
|Dimensions||3 × 1 × 1 in|
So far, these are working great. East to apply and came with prep pads.
Works great the only thing I’d change is maybe make it smaller even if you only showed 100 to 150 degrees don’t really care if it’s cooler than that and I’ll stop before it gets to 150 but great product like how it came with a alcohol prep pad saves time and energy thank you!
Exactly what I was needing and works like a charm. Just clean the barrel with the provided alcohol pad, let dry and stick it on. First range trip with it on the barrel was pretty cold at 50 deg F. Barrel never got over 80 deg F after a few five round strings. I think the cold weather kept things cool. Can’t wait to try it out when things heat up here in Texas.