The brand new B-Series line of optics are the most feature packed optics on the market. While the B-10 retains the popular 1.8-10x magnification range today’s professionals are calling for, the likeness stop there. These optics now have new locking elevation and windage knobs,an adjustable zero stop, revolution counter, tool-less elevation zero and single button illumination of the reticle, which has been built into the parallax adjustment knob. All this and still the same US Optics premier level of durability, reliability and performance.
Horus Vision H425 Reticle
The Horus Vision H425 is designed for ease of use to meet the needs of the hunter and marksman. As part of the MR-10 series of rifle scopes the H425 reticle includes an inverted “L” range finder in the lower left quadrant that is calibrated in shooters minute of angle (SMOA) or inch per hundred yards (IPHY) for quick and precise calculation of range and distances. The H425 grid has 8 horizontal stadia lines which represent 8 Mils of elevation hold. The grid lines allow the shooter to correct for elevation and windage without turning knobs or counting clicks. The smaller, secondary horizontal lines allow for precise elevation holds with standard spacing between each secondary horizontal line set at 1 mil to compensate for wind, drift, speed of target, etc.
GAP MIL Scale
Designed in conjunction with George from GA Precision, this MIL based reticle offers full MIL as well as ½MIL increments. A total of 9 MIL’s from the center down on the vertical axis, and 4 MIL’s left and right of center on the horizontal axis.
MOA Scale Type 1
This reticle was designed to be a simple MOA reticle that allows for precise hold over shots and ranging. Each hash mark is 2 MOA with numbering every 10 MOA for reference. A total of 40 MOA on the vertical axis below the center, and a total of 30 MOA on each side of center on the horizontal axis.