Python Sporter Barrel Vice Top

The Python Sporter Barrel Vice Top is just that. These tops are made to fit the Python (two-hole top) barrel vise which can be found here with rimfire/sporter barrels in mind. The tops will enable you to grip barrels as small as .500” to 1”.

To use the Python Sporter Barrel Vice Top for Rimfire/Sporter just remove the nuts and washers from your Python Barrel Vise. Keep the springs in place, put the Rimfire/Sporter top onto your vise.

On a sporter barrel- grip the barrel several inches away from the receiver/action on an area of the barrel that will make full contact with the barrel vise sporter top.

On a rimfire barrel-Grip on an area of the barrel that will make full contact with the barrel vise near the receiver/action.

On very tight action to barrel manufacturers companies that start with H, T or R a cardboard wrap is recommended to keep the barrel from slipping in the vise. These tops will handle over 90 ft/lbs. of torque on the nuts without bending.