AT-X Hinge Assembly
The AT-X Hinge Assembly is the part that converts the Accuracy International AT-X Rifle into a Folding version of the AT-X. The AT-X is designed to be either a fixed stock or a folder, and this allows you to convert your rifle into a folding stock.
The Accuracy International Part number is 29795BL.
The AT-X hinge Assembly only comes in black for all variety of colors of the Accuracy International AT-X Rifles, so it works with all color variations of your rifle!
Below the manual calls for 44.3 inch pound torque settings for #4 (bolts to main chassis), and #5 which is the bolt to the rear chassis. These are basically the same bolt sets you will use for replacing the fixed chassis with the hinge assembly. The AT-X Hinge Assembly comes with (4) M6 hex screws and (1) M5 hex screw. You will need to remove the part below that is between the screws #4 and #5.
Additionally, you will need to remove the below part as well (between #1 and #2). You will then replace these with the Hinge Assembly.
|Dimensions||4 × 4 × 4 in|