Schmidt Bender PMII 5 20×50 Ultra Short
Schmidt Bender PMII 5 20×50 Ultra Short in Black with the Tremor 5 reticle.
The Tremor 5 is the same as the Tremor3 but without the ranging markings. Simplifying use for competitive shooting.
This part # is 173-911-562-M2-I5
5-20×50 PMII Ultra Short LPI Tremor5 1cm ccw DT II+ MTC LT / ST II ZC CT
1/10 mil increments / 1cm/100m.
Elevation Turret : DT II+ MTC LT
Double Turn II+ (DT II+) – much larger numbers in two tone yellow and white for easy identification in stressful conditions, or for older guys with aging eyes. Number are in MRAD. 1 MRAD is 10 cm/100 meters.
Lockable (LT) – using the new locking feature a slide lock to the left side of the turret. This controls locking of the turret, and enables or disables MTC. There is a small window at the front of the turret which indicates status:
- Green: Unlocked, MTC enabled (the MTC on the full numbers is much less stiff than prior versions which is much nicer)
- Red: Locked
- Black: Unlocked, MTC disabled
More Tactile Clicks (MTC) – This is a slightly different feel to the click when passing the full value MRAD numbers. The idea behind this is to allow you to count your position in the turret without visually checking, or to use it to confirm when conditions are difficult to see (darkness for example).
Windage Turret : ST II ZC LT
Single Turn II (ST II) – single turn 1/10 Mil tactile clicks and really large numbers make the numbers very easy to see. Also each of the full value numbers have a “R” or “L” next to them to indicate direction of movement.
Zero Click – Zero click has a more noticeable MTC value at the “0” so it is easier to return to zero when dialing (since there is not MTC)
Lockable (LT) – the windage turret uses the Generation II locking function similar to the elevation turret but without MTC.
- Green: Unlocked
- Red: Locked
| Weight | 64 oz |
|---|---|
| Dimensions | 19 × 6 × 5 in |