XTSP Mod 22 Trigger from X-Treme Shooting Products
The XTSP Mod 22 Trigger Remington 700 is a Mil-Spec two stage trigger with a CNC machined steel and salt bath nitride finished for a corrosion resistant black finish. The hardened tool steel sear levers are cut by wire EDM and held to extremely precise tolerances and are then plated with Teflon nickel alloy to provide a self-lubricating finish which means long durability, low maintenance and exceptional corrosion resistance.
This trigger is a sealed design that helps eliminate failures due to dust and debris infiltration. One of only a few triggers I have never seen fail at a match due to dust, and I have shot in some extremely dusty matches (New Mexico, Dog Valley Utah etc).
This trigger works well with the Bighorn TL3 and other Remington 700 clone custom actions.
This manufacturer is one of the best US Trigger makers, and was selected to produce the trigger for the Remington MSR and CSR sniper rifle systems.
Subsequently had been producing the new Accuracy International Competition trigger – sold exclusively through Accuracy International.
The XTSP Mod 22 trigger is a true 2-stage 3 lever trigger, which comes in either a righthand safety or no safety. The trigger can be ordered with a standard curved trigger shoe, or with an adjustable trigger for competition. We only stock the competition style shoe – which now uses a dovetail rail instead of a rod as shown in the manufacturers pictures.
The variations we don’t stock (no safety variant – and – curved tactical shoe) can be ordered, just contact us to order.
The trigger is user adjustable in a range from approximately 10 oz to 3.5 lbs. Adjustments are possible to the First stage travel, First stage pull weight and Second stage pull weight.
- Safety versions: the Mod 22 has a 2 position safety referred to as a “Failsafe” safety. It provides a similar function to the bolt shroud safety on a Mauser 98/Winchester Model 70. When it is fully engaged the top trigger sear will retain the firing pin and block the firing pin. Through rigorous Remington Laboratory and Military testing the failsafe safety was able to pass the 1.5 meter drop test onto a steel plate over and over again. To date the manufacturer believes this is the only safety in the USA currently that passes this test.
|Dimensions||6 × 4 × 4 in|